Sale

Eyes HTV Pack

Write a review (pictures are helpful!)

| Ask a question

Sale price $15.14 Regular price ~~$17.85~~

Shipping calculated at checkout.

This pack contains 1 each of the following: (Total 4 sheets in this pack)

1 - ThermoFlex Fashion Patterns Eyes HTV 12x15 sheet

1 - ThermoFlex Plus HTV Bahama Blue 12x15 sheet

1 - ThermoFlex Plus HTV Ocean Blue12x15 sheet

1 - ThermoFlex Plus HTV Neon Yellow 12x15 sheet (Cold Peel)

Application Instructions For ThermoFlex Fashion Patterns (Eyes HTV)

Blade – 45°

Cut – Mirror image

Temp – 305° F

Pressure – Medium, even

Time – 8-10 seconds

Peel – Warm

Care – Wash inside out, gentle cycle, cold water, tumble dry. Not suitable for dry-cleaning.

Applies to: Cotton, Uncoated Polyester, Acrylic, and similar fabrics Excluding Nylon

Special Precautions - We do not recommend layering anything on top of this product.

If sheet has an air bubble, use a needle to pop it from the back (non pattern side). This is not considered a flaw.

Application Instructions For ThermoFlex Plus HTV

Blade – 45°

Cut – Mirror image

Temp – 320°-330° F

Pressure – Medium, even

Time – 15 seconds

Peel – Warm (except Neons, Columbia Blue, Frosty Clear- peel cold), cover with Teflon and repress for 2 seconds. (Repress for 5 seconds for Frosty Clear)

Care – Wash warm water. Tumble dry normal. Dry-cleaning okay.

Applies to: Cotton, Uncoated Polyester, Cotton/Polyester, Polyester/Acrylic, Linen, Wool Excluding Nylon

Frosty Clear Applies to: Cotton, Uncoated Polyester, Cotton/Polyester, Polyester/Acrylic Excluding Nylon

Most colors of ThermoFlex® Plus may be applied in layers with the exception of:

Neon colors
Antique Silver
Graphite
Bronze
Old Gold
Copper Gold
Dark Copper
Metal Flake colors
Columbia Blue

These colors cannot have layers adhered on top of them, although we have successfully layered these products on top of other colors.

Be advised that dye-migration has occurred with low energy dyes in polyester and poly-blend fabrics.

Size is +/- 0.50 inch and +/-3% on length

Colors of products may be different than what the screen on your device shows. TIP: Always perform a test cut prior to cutting a whole design

Helpful tip-Specialty Materials recommends if your T shirt or material your are putting this HTV on says "dry fit", "Moisture Wicking", or is Gildan Ultra Cotton, use a spray bottle of rubbing alcohol and squirt the material where you are putting the design. Then rub it in a bit with a cloth and dry or even heat press it to dry then press the design. This is due to the material being a coated material, instead of an un coated material.