It's A Girl! HTV Pack-Siser® EasyWeed® HTV 12x15 Sheets - CraftCutterSupply.com

It's A Girl! HTV Pack-Siser® EasyWeed® HTV 12x15 Sheets

Write a review (pictures are helpful!)
| Ask a question
  • Save $0


It's A Girl! HTV Pack Includes: (2) Pink (2) White (2) Lilac (2) Bubble Gum (2) Light Pink 10 sheets of Siser® EasyWeed® heat transfer vinyl 12x15 sheets

This backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash. It has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.

This is CPSIA Certified

Recomended Cut Settings

*Suggestion only, used for a starting point. Your settings may need to be adjusted from here. We always suggest test cutting to find the best settings for your individual machine*

Cricut®:

Blade: Standard

Setting: Iron-on

Silhouette Cameo:

Blade: Standard, 3

Setting: Heat Transfer Material (smooth)

Speed: 8

Thickness: 6

Brother:

Blade: 2

Cut Speed: 1

Cut Pressure: 1

Application Instructions (heat press)

• Cut in reverse• Weed excess material

• Preheat garment for 2-3 seconds

• Cover design with Teflon cover sheet

• Apply design at 305°

• Use medium pressure for 10-15 seconds

• Peel carrier hot or cold

Application instructions (home iron)

• Set iron dial between Cotton and Linen

• Cover design with Teflon cover sheet

• Place on flat, hard surface (ironing board not recommended)

• Press iron with medium/firm pressure (do not slide iron)

• Press each section of design for 10-15 seconds

• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

• Peel carrier hot or cold

Applies to:

100% cotton

Poly/cotton blends

100% polyester

Leather

Laundering:

Wait 24 hours before 1st wash

Machine wash warm or cold / mild detergent

Dry on normal dryer setting

Do not dry clean.

Size of sheets is 12 inches x 14.75 inches or 11.75 x 15 inches +/- .5 inch.

Colors of products may be different than what the screen on your device shows.

TIP: Always perform a test cut prior to cutting a whole design.


We Also Recommend