Use Reflection Protection™ for nighttime visibility and brilliance in the spotlight!
Reflection Protection™ films consist of very small glass beads embedded in a layer of polyester film to reflect almost all the light that shines on them.
Reflection Protection™ is available in Certified Safety Reflective Colors, our Safety Silver collection. Safety Silver retro-reflective film produces a maximum reflectivity of 675 candela/lux/meter. This product does not have a sticky carrier.
Use Safety Silver for garments and other products used by police, firefighters, EMS, postal workers, traffic control, parking, utility, road, construction, security personnel, runners, bicyclists and motorbikers, among others.
Remember to remove heat liner before plotting!
Blade – 60°, slow cutting speed
Cut – Mirror image
Temp for 9501 – 320° F
Pressure – Firm, even
Time – Prepress garment for 5 seconds, then press material for 3-5 seconds
Peel – Warm, cover with Teflon and repress for 10-15 seconds, let cool then remove Teflon
Care – Wash inside out. Warm water, gentle cycle. Tumble dry low heat. Dry-cleaning ok.
Nylon and other heat-sensitive fabrics, cotton, cotton/polyester blends, heat sensitive fabrics, nylon, polyester/acrylic blends, uncoated polyester
Size is +/- 0.50 inch
Colors of products may be different than what the screen on your device shows. TIP: Always perform a test cut prior to cutting a whole design
Helpful tip-Specialty Materials recommends if your T shirt or material your are putting this HTV on says "dry fit", "Moisture Wicking", or is Gildan Ultra Cotton, use a spray bottle of rubbing alcohol and squirt the material where you are putting the design. Then rub it in a bit with a cloth and dry or even heat press it to dry then press the design. This is due to the material being a coated material, instead of an un coated material.