Siser® Easyweed® Stretch HTV Bubble Gum
*Note-This product is now being manufactured with a "frosty" cover sheet*
Performance wear has met its match! Stretch delivers all the benefits of our heat transfer material and combines it with super stretchability to create one remarkable heat transfer material! The thinnest of any material, Stretch has an ultra-matte finish and a soft hand , including sweet mint and coral. While Stretch is ideal for performance apparel, the soft hand and light weight often make it a favorite for other garment decorating.
Recommended Cut Settings *Suggestion only, used for a starting point. Your settings may need to be adjusted from here. We always suggest test cutting to find the best settings for your individual machine*
Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Cut Speed: 1
Cut Pressure: 1
Application Instructions (heat press)
• Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Cover design with Teflon cover sheet • Apply design at 320° • Use firm pressure for 20 seconds • Peel carrier hot or cold
Application instructions (home iron)
• Set iron dial between Cotton and Linen • Cover design with Teflon cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with firm pressure (do not slide iron) • Press each section of design for 20 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold
Stretch Applies to: 100% cotton Poly/cotton blends 100% polyester Leather Lycra®/Spandex
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean
Size is +/- .5 inch
Colors of products may be different than what the screen on your device shows.
TIP: Always perform a test cut prior to cutting a whole design.