Siser Easyweed Extra Navy Blue - CraftCutterSupply.com

Siser Easyweed Extra Navy Blue

Write a review (pictures are helpful!)
| Ask a question
  • $0.50


EasyWeed Extra shares almost all the great benefits of Easyweed with the bonus of adhering to nylon! EasyWeed Extra is on a pressure-sensitive carrier so you can cut detailed logos and weed them effortlessly. The ability to peel your designs HOT or COLD offers you the option to peel each item as it comes off the press, or to stack all applied garments and peel after the job is complete. Looking to provide multi-color designs for your customers? EasyWeed Extra – with its semi-gloss finish, can be layered, extending your creativity and allowing you to say “yes” to more complicated designs.

EasyWeed Extra is CPSIA Certified, so it’s perfect for decorating items intended for children.

Cricut:

 Blade: Standard
Setting: Iron-on

Silhouette Cameo:

 Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6

Scan N Cut:

 Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24:

 Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s

Graphtec:

Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

EasyWeed Extra Applies to:

 100% cotton
Poly/cotton blends
100% polyester
Leather
Nylon

Laundering:

 Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Please Note: CraftCutterSupply.com is not affiliated with Siser and is not a distributor for Siser.  "Siser" and "Easyweed" are trademarks owned by Siser North America INC. To become an Authorized Reseller/Distributor and be acknowledged as such by Siser, CraftCutterSupply.com would be required to stop selling the ThermoFlex Plus Material and exclusively sell only Siser products.

Size is +/- .5 inch on width, +/- 3% on length

Colors of products may be different than what the screen on your device shows.

TIP: Always perform a test cut prior to cutting a whole design.

 


We Also Recommend