Siser® Holographic HTV Rainbow
Holographic contains color changing chips that create the effect of depth and dimension. Available in many special effect colors and finishes, Holographic will take your designs to a new level. Love the look of rhinestones but don’t want to go through all the hassle? Holographic can be cut to look exactly like rhinestones, without having to go through all the extra work associated with applying rhinestone designs. The Holographic line also features our Pearl material. Pearl is unlike any other material, giving your designs an opalescent finish. Holographic can be cut with laser systems.
Setting: Light Cardstock
Blade: Standard, 3
Setting: Heat Transfer,
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier cold
Holographic Applies to:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Holographic is CPSIA Certified, so it’s perfect for decorating items intended for children.
Some of these may have slight color variations. Some are more pink/green and some are more red/blue. This comes from the manufacturer that way.
Size is +- 0.50 inch on width and +/- 3% on length
*Colors may be different than what the screen on your device shows.
Always Test Cut before cutting a whole design. Holographic vinyl cut settings will be different than other types of HTV.