Skip to product information
1 of 2

Subli-Print Thin Matte White (For A Sublimation Printer)

Subli-Print Thin Matte White (For A Sublimation Printer)

2 Reviews
| Ask a question
Regular price $3.99
Regular price $4.99 Sale price $3.99
Sale Sold out
Shipping calculated at checkout.
Sheet Size
Subli-Print Thin Sheet Quantity
Mask Quantity



Cotton, Uncoated Polyester, and Cotton/Polyester Blends

This product cannot be used on sublimated polyester.


8.67 mils/220 microns

 Print directly onto Subli-Print® Thin- no sublimation paper needed
• Matte white sublimation material
• Works well on both light and dark garments
• Cut using a plotter and registration marks or by hand with scissors


1.  Insert sheet into your printer.  printable side is the matte side so put into your printer accordingly.

2.  Print in "Right Reading" directly onto the subli thin sheet using your sublimation printer. 

3.  Allow the subli thin sheet to dry prior to pressing: either  hovering a hot heat press for 1 minute or letting it air dry for 30 minutes.  

4.  Cut using a 45 degree blade and weed access material.  Scissors are also ok.

5.  For solid designs no mask is needed, simply peel away from carrier, lay on garment, apply cover sheet ands press.  For multi pieces or more intricate designs use transfer sheet provided.  Remove mask from backing, apply mask to the printed image, then use a squeegee to smooth the mask down.  

6.  remove the backing leaving only your masked design.

7.  Pre heat garment for 2-3 seconds.

8.  Place the masked design onto the garment.

9.  Cover with a cover sheet and press.


If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.

PRINT & CUT – Right reading. Trim excess white from design with cutter or scissors

TRANSFER MATERIAL – If needed, use SubliMask (comes with the pack)

TEMP – 311° F

PRESSURE – Medium, even

TIME – 15 seconds

PEEL – Warm

CARE – Wait 24 hrs before first wash. Wash inside out with mild detergent, gentle cycle, cold water, tumble dry. No bleach or other harsh cleaners. Not suitable for dry-cleaning.
Basic Cutter settings *Settings may vary depending on machine and blade condition.  Always do a test cut prior to cutting your design.
Blade: Standard
Setting: Iron-on
Blade: auto, 3
Material: heat transfer flocked
Speed: 8
Force: 15


PDF of instructions click here

Size is +/- .5 inch on width, 3% on Length

Colors of products may be different than what the screen on your device shows. TIP: Always perform a test cut prior to cutting a whole design.

No Refunds

View full details