SubliFlex Glitter White (Sublimation Glitter, Can Print Directly Onto This) CLEARANCE

We will no longer be selling this product after it sells out.

***This is for the SubliFlex Glitter White ONLY.  If you need the mask Go HERE***

The Glitter White can be printed on directly- no sublimation paper required! This is a fantastic glitter white HTV to sublimate on. Don’t limit yourself to just white polyester garments- SubliFlex® also works on cotton and even dark garments!

SUBLIMATION – Pre-activate sublimation inks by peeling off the backing, place on a siliconized sheet, make sure your design has the mask covering it, and cover with paper and pressing it at 375°F with low pressure for 30 seconds

TEMP – After cooling, press at 320° F on garment

TIME – 15 seconds

PRESSURE – Medium, even

FOR ALL OTHER GARMENTS (cotton, cotton/poly, fabric blends)

SUBLIMATION – Sublimation inks can be activated in one press while adhering to garment

TEMP – 375° F – peel off backing before press.  Make sure design is covered with mask and paper.

TIME – 30 seconds

PRESSURE – Low to medium, even

IT’S BEST TO TEST!

If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.

BLADE – 45°

PRINT & CUT – Right reading. Trim excess white from design with cutter or scissors. Please note, the Glitter Clear cannot be run directly through the printer. Please sublimate with sublimation paper printed in reverse and pressed at 375° F for 30 seconds.

TRANSFER MASK – SubliMask

CARE – Wash inside out. Gentle cycle, warm or cold water. Tumble dry. Do not dry clean. No bleach or aggressive cleaning agents

 

PDF of instructions click here

 

Size is +/- .5 inch on width, 3% on Length

Colors of products may be different than what the screen on your device shows. TIP: Always perform a test cut prior to cutting a whole design.

No Refunds or Exchanges