This material is suitable for white and light colored fabrics, cotton, some mouse pads, koozies, etc. It can be used in oil and non-oil based color laser copiers and printers. It is compatible with a wide selection of laser printers and copiers.
This paper is great for transferring full color photographs and designs. It is extremely thin and has a soft hand. Printed images are bright and durable and has excellent wash resistance.
Excluding Nylon, Dazzle Cloth, Shiny Polyester, and Moisture-Wicking Materials.
Special Precautions Make sure that the print is thoroughly dry before pressing! Keep away from direct heat, sunlight, and humidity
The side that gets printed is the blank side of the sheet. Only load one sheet at a time. Print in MIRROR image. Do not leave a margin around the edge of the image. Any white material will be clear on the garment. Round the edges, when possible, to improve adhesion. Do not layer with other HTV.
Use Heavy or Labels print setting.
Print – Print In Reverse. Use Heavy or Labels print setting
Transfer Material – Not necessary
Temp – 375° F
Pressure – Maximum, even.
Time – Prepress garment 5-10 seconds. Place on fabric image face down. Press for 25 seconds.
Peel – Wait 4-8 seconds, peel backing paper off. To soften image, gently tug all sides of image
Care – Wait 24 hours before washing. Wash inside out, gentle, warm or cold water, tumble dry. Do not dry clean. No bleach or aggressive detergents.
Applies to: Cotton, Uncoated Polyester, Fabric Blends, Satin Excluding Nylon, Dazzle Cloth, Shiny Polyester, and Moisture-Wicking Materials
Caution: Printable media is very sensitive. Always handle with care - with clean hands. Always store the sheets in a plastic bag, protected from dust.
Test on dazzle cloth and other moisture-wicking polyesters. Moisture-wicking materials have better adhesion when washed and dried using no fabric softener or blotted with rubbing alcohol before pressing.
Be advised that dye migration has occurred with low energy dyes in polyester and poly-blend fabrics