Siser EcoStretch HTV White Choose Your Length ON SALE TODAY

EasyWeed EcoStretch heat transfer material by Siser® is lightweight, water-based, and applies at a low temperature so it's perfect for performance fabrics, spandex blends, and any other project that needs a little extra bounce back. Works with all craft cutters and can be applied with either a home iron or a heat press.

EasyWeed EcoStretch is CPSIA Certified so it's perfect for decorating children's clothing and accessories.

Application Instructions (heat press)

• Cut in reverse and weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 250°F/121°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier hot

Application Instructions (home iron)
• Set iron dial between Cotton
• Cover design with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium pressure (do not slide iron) for 10-15 seconds
• Peel carrier hot
* If areas lift after application, cover and press for 10 seconds.

Cut Settings (Settings may vary based on blade condition and age of machine. These are a good starting point.)

Silhouette 4:
Blade: AutoBlade, 3
Force: 6
Speed: 8

Cricut Maker:
Blade: AutoBlade, Fine-Point
Setting: Heat Transfer (Non-Cricut)

Cricut Explore Air:
Blade: AutoBlade, Standard
Setting: Vinyl +

Siser Romeo & Juliet:
Blade: 45°
Gram Force: 5-10
Offset: .250
Speed: 10

Size is +/- .5 inch

Colors of products may be different than what the screen on your device shows.

TIP: Always perform a test cut prior to cutting a whole design.