Skip to product information
1 of 2

3" x 2" Oval Gray Laserable/DTF/UV DTF Leatherette Patch with Heat Adhesive

3" x 2" Oval Gray Laserable/DTF/UV DTF Leatherette Patch with Heat Adhesive

Regular price $2.49 USD
Regular price Sale price $2.49 USD
Sale Sold out
Shipping Policy.

Laserable Leatherette offers the look and feel of genuine leather at a fraction of the price. This richly textured, synthetic material is water resistant, easy to clean and durable enough for the rigors of daily use. The high quality workmanship of each leatherette piece is sure to impress every recipient with its elegant individuality. Laserable leatherette items can be personalized through laser engraving for a sharp contrast, or DTF (Direct To Film) for a full-color effect.

These also work with our UV DTF prints.

The back side of the patch is sticky after peeling off the backing.  This helps with positioning.  

Here is a link to our video making a patch on a hat with DTF - https://youtu.be/S8uqaSTWp7c

 Product Details

Cleaning Instructions Clean residue after lasering with LA Awesome or any neutral cleaner. Wipe spots with a damp cloth, alcohol will remove ink marks.
Length 3"
Height 2"
Thickness 1/16
Overall Size 3" (L) x 2" (H)
Maximum Personalization Area 2 3/4" x 1 3/4"
Color gray
Lasered Color black
Material faux leather

RECOMMENDED LASER RASTER SETTINGS:
Laser engravers vary and adjustments may be necessary to achieve
Optimum Results:
RECOMMENDED LASER RASTER SETTINGS:
35 watt DPI 600 Speed 90% Power 35%
60 watt DPI 600 Speed 100% Power 30%
80 watt TROTEC PPI 600 Speed 90% Power 74%


TIPS FOR BEST RESULTS
1. Focus right on the leatherette
2. Cleaning should not be necessary with leatherette products. However
if it is use a small amount of LA Awesome on
a microfiber towel.
3. Confirm the position of your artwork by testing on a separate piece
of leatherette or tape a clear piece of plastic onto the item.
4. Vector cut mask or plastic for placement guides

HEAT SETTINGS TO APPLY The Patch
Temperature: 270 degrees
Pressure: medium
Time: 10-12 seconds

LASER VECTOR CUTTING SETTINGS
35 watt: Speed 20% Power 35% 50Hz
60 watt: Speed 25% Power 25% 100Hz
120 watt: Speed 85% Power 35% 2000Hz
80 watt(Trotec): Speed 65% Power 40% 2000 PPI

No Returns Or Exchanges

View full details