Free Vinyl With Your Order! Just add 1 to your cart.

Free Vinyl With Your Order! Just add 1 to your cart.

Regular price $0.00 USD
Regular price Sale price $0.00 USD
Sale Sold out
Shipping Policy.

Get FREE Vinyl with your order!  

Choose between Adhesive Vinyl or Heat Transfer Vinyl (HTV)

Adhesive vinyl will be either 1- 12x12 sheet or 2- 6x12 sheets

HTV will be 1- 7.5x12 sheet or 3 - 3x12 Sheets.

Limit 1 per order.  It can be either Adhesive Vinyl or HTV, not both.  We will only send 1 if there are 2 or more on your order.

You can not choose your color. 

There are no refunds, exchanges, or returns on this product.  We will not reship if it was damaged in transit.

If you choose HTV, It is applied as follows:

Recommended Cut Settings

*Suggestion only, used for a starting point. Your settings may need to be adjusted from here. We always suggest test cutting to find the best settings for your individual machine*


Blade: Standard

Setting: Iron-on

Silhouette Cameo:

Blade: Standard, 3

Setting: Heat Transfer Material (smooth)

Speed: 8

Thickness: 6


Blade: 2

Cut Speed: 1

Cut Pressure: 1

Application Instructions (heat press)

• Cut in reverse• Weed excess material

• Preheat garment for 2-3 seconds

• Cover design with Teflon cover sheet

• Apply design at 305°

• Use medium pressure for 10-15 seconds

• Peel carrier hot or cold

Application instructions (home iron)

• Set iron dial between Cotton and Linen

• Cover design with Teflon cover sheet

• Place on flat, hard surface (ironing board not recommended)

• Press iron with medium/firm pressure (do not slide iron)

• Press each section of design for 10-15 seconds

• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

• Peel carrier hot or cold

Applies to:

100% cotton

Poly/cotton blends

100% polyester



Wait 24 hours before 1st wash

Machine wash warm or cold / mild detergent

Dry on normal dryer setting

Do not dry clean

Size is +/- .5 inch

Colors of products may be different than what the screen on your device shows.

TIP: Always perform a test cut prior to cutting a whole design.


As of 2/10/23 you must add this to your cart to get a free item.  


View full details