Skip to product information
1 of 1

Siser EasyWeed Silver HTV Choose Your Length

Siser EasyWeed Silver HTV Choose Your Length

Regular price $0.20 USD
Regular price $1.99 USD Sale price $0.20 USD
Sale Sold out
Shipping Policy.
Size

This backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash. It has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.

This is CPSIA Certified

Please Note:  Easyweed Silver may have an appearance of striping when viewed at different angles but will be normal when viewed from straight on.  This is how it has been manufactured.  There are no refunds or returns on this product.

Recomended Cut Settings

*Suggestion only, used for a starting point. Your settings may need to be adjusted from here. We always suggest test cutting to find the best settings for your individual machine*

Cricut®:

Blade: Standard

Setting: Iron-on

Silhouette Cameo:

Blade: Standard, 3

Setting: Heat Transfer Material (smooth)

Speed: 8

Thickness: 6

Brother:

Blade: 2

Cut Speed: 1

Cut Pressure: 1

Application Instructions (heat press)

• Cut in reverse• Weed excess material

• Preheat garment for 2-3 seconds

• Cover design with Teflon cover sheet

• Apply design at 305°

• Use medium pressure for 10-15 seconds

• Peel carrier hot or cold

Application instructions (home iron)

• Set iron dial between Cotton and Linen

• Cover design with Teflon cover sheet

• Place on flat, hard surface (ironing board not recommended)

• Press iron with medium/firm pressure (do not slide iron)

• Press each section of design for 10-15 seconds

• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

• Peel carrier hot or cold

Applies to:

100% cotton

Poly/cotton blends

100% polyester

Leather

Laundering:

Wait 24 hours before 1st wash

Machine wash warm or cold / mild detergent

Dry on normal dryer setting

Do not dry clean

Size is +/- .5 inch on width, +/- 3% on length

Colors of products may be different than what the screen on your device shows.

TIP: Always perform a test cut prior to cutting a whole design.

View full details