Get 200 reward points when someone buys off your referral link in your rewards! That is equal to $10 per referral and they get $5 off their order!

Cart (0)


Siser® Sparkle™ HTV Blue Jeans

Write a review (pictures are helpful!)
| Ask a question

Regular price $3.75

Sparkle Heat Transfer Vinyl is a fashionable alternative to Glitter HTV by Siser. Specially constructed to be soft to the touch, each color includes silver glitter flakes embedded in the material so designs have a smooth finish. Sparkle is available in 14 colors, including gold and silver. Looking to layer? Sparkle can be layered for ultimate bling! Think outside the box and use Sparkle HTV on shoes, belts, and other hard-to-print items. If you like to keep it simple, Sparkle can be applied to t-shirts, hoodies, sweats, and scrubs too!

Sparkle Heat Transfer Vinyl is:

  • Laser-Friendly
  • Layerable
  • Iron-On
  • CPSIA-Certified

For Use On: 100% cotton | Poly/cotton blends | 100% polyester | Leather

Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with teflon cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium pressure for 10-15 seconds
If areas lift after application, cover and press for 5-10 seconds.
Peel carrier hot or cold

Application Instructions (Heat Press): Cut in reverse and weed excess material Preheat garment for 2-3 seconds Apply design at 305°F / 150°C (EasyPress® users add approx. 30°) Use medium/firm pressure for 10-15 seconds Peel carrier hot or cold

Laundering: Wait 24 hours before first wash Machine wash cold with mild detergent Do not bleach or dry clean Dry on low setting

 

Suggested starting cut settings.  
Cricut:

Blade: Standard
Setting: Iron-on

Silhouette Cameo:

Blade: Standard, 2 
Material: Heat Transfer, Smooth
Speed: 8
Force: 4 

Scan N Cut:

Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Size is +/- .5 inch on width, +/- 3% on length

*When ordering longer lengths, expect some flaws in the material.

Colors of products may be different than what the screen on your device shows.

TIP: Always perform a test cut prior to cutting a whole design.