Siser EasyWeed Latte HTV Choose Your Length CLEARANCE
Siser EasyWeed Latte HTV Choose Your Length CLEARANCE
This backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash. It has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.
This is CPSIA Certified
Recommended Cut Settings
*Suggestion only, used for a starting point. Your settings may need to be adjusted from here. We always suggest test cutting to find the best settings for your individual machine*
Cricut®:
Blade: Standard
Setting: Iron-on
Silhouette Cameo:
Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Speed: 8
Thickness: 6
Brother:
Blade: 2
Cut Speed: 1
Cut Pressure: 1
Application Instructions (heat press)
• Cut in reverse• Weed excess material
• Preheat garment for 2-3 seconds
• Cover design with Teflon cover sheet
• Apply design at 305°
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Teflon cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or cold
Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean.
Size is +/- .5 inch on width, +/- 3% on length
Colors of products may be different than what the screen on your device shows.
TIP: Always perform a test cut prior to cutting a whole design.