Siser Easyweed Solid Colored HTV Powder Blue - CraftCutterSupply.com

Siser Easyweed Powder Blue HTV

  • $2.55


This backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash. It has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.

This is CPSIA Certified

Recomended Cut Settings

*Suggestion only, used for a starting point. Your settings may need to be adjusted from here. We always suggest test cutting to find the best settings for your individual machine*

Cricut®:

Blade: Standard

Setting: Iron-on

Silhouette Cameo:

Blade: Standard, 3

Setting: Heat Transfer Material (smooth)

Speed: 8

Thickness: 6

Brother:

Blade: 2

Cut Speed: 1

Cut Pressure: 1

Application Instructions (heat press)

• Cut in reverse• Weed excess material

• Preheat garment for 2-3 seconds

• Cover design with Teflon cover sheet

• Apply design at 305°

• Use medium pressure for 10-15 seconds

• Peel carrier hot or cold

Application instructions (home iron)

• Set iron dial between Cotton and Linen

• Cover design with Teflon cover sheet

• Place on flat, hard surface (ironing board not recommended)

• Press iron with medium/firm pressure (do not slide iron)

• Press each section of design for 10-15 seconds

• If areas of design lift after application, replace cover sheetand re-press for 5-10 seconds

• Peel carrier hot or cold

Applies to:

100% cotton

Poly/cotton blends

100% polyester

Leather

Laundering:

Wait 24 hours before 1st wash

Machine wash warm or cold / mild detergent

Dry on normal dryer setting

Do not dry clean

Please Note: CraftCutterSupply.com is not affiliated with Siser and is not a distributor for Siser.  "Siser" and "Easyweed" are trademarks owned by Siser North America INC. To become an Authorized Reseller/Distributor and be acknowledged as such by Siser, CraftCutterSupply.com would be required to stop selling the ThermoFlex Plus Material along with the True 12 HTV and exclusively sell only Siser products.

Size is +/- .5 inch on width, +/- 3% on length

Colors of products may be different than what the screen on your device shows.

TIP: Always perform a test cut prior to cutting a whole design.


We Also Recommend