Siser Stretch HTV Coral
Performance wear has met its match! Stretch delivers all the benefits of our heat transfer material and combines it with super stretchability to create one remarkable heat transfer material! The thinnest of any material, Stretch has an ultra-matte finish and a soft hand , including sweet mint and coral. While Stretch is ideal for performance apparel, the soft hand and light weight often make it a favorite for other garment decorating.
Recomended Cut Settings *Suggestion only, used for a starting point. Your settings may need to be adjusted from here. We always suggest test cutting to find the best settings for your individual machine*
Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Cut Speed: 1
Cut Pressure: 1
Application Instructions (heat press)
• Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Cover design with Teflon cover sheet • Apply design at 305° • Use medium pressure for 15 seconds • Peel carrier hot or cold
Application instructions (home iron)
• Set iron dial between Cotton and Linen • Cover design with Teflon cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold
Stretch Applies to: 100% cottonPoly/cotton blends 100% polyester LeatherLycra®/Spandex
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean
Please Note: CraftCutterSupply.com is not affiliated with Siser and is not a distributor for Siser. "Siser" and "Easyweed" are trademarks owned by Siser North America INC. To become an Authorized Reseller/Distributor and be acknowledged as such by Siser, CraftCutterSupply.com would be required to stop selling the ThermoFlex Plus Material and exclusively sell only Siser products.
Size is 12 inches +/- .5 inch and +/- 3% on length
Colors of products may be different than what the screen on your device shows.
TIP: Always perform a test cut prior to cutting a whole design.*We try to keep everything in stock, however, lengths longer than 30ft/10yds may need to be special ordered and take more time to ship out. Email us if you have any questions on when the longer lengths may ship.