Smoke 2 12x12

Permanent Adhesive vinyl. Not to be used for garments.

Permanent Vinyl has the option of laminate for longer outdoor durability or if being handled a lot

HTV comes with a transfer sheet

• APPLIES TO
  100% cotton • 100% polyester • Poly/cotton blends • Leather
• HEAT APPLICATION
  Preheat: 2-3 Seconds • Temperature: 295° F / 160° C • Pressure: Medium • Time: 15 Seconds • Peel: HOT
• CARE INSTRUCTIONS
  Do not dry clean • Machine wash WARM / mild detergent • Dry on normal setting • No chlorine bleach • Wait 24 hours before first wash • Turn garment inside out

We highly suggest test cutting before cutting a whole design, as this Glitter HTV material is thicker than regular HTV.

Size is +/- .25 Inch Colors of products may be different than what the screen on your device shows.

Instructions for printed HTV: TEST CUT FIRST FOR YOUR SETTINGS Cut design face up (like adhesive vinyl) Weed vinyl. Apply transfer tape to design, you may have to rub paper down hard. Peel up design. Places design on garment. Heat Press: 295° for 15-20 seconds, medium pressure, hot peel Iron: Place PTFE non stick sheet over design, firm pressure. 15-20 second intervals, then check to see if design is on good.

*You should be able to see the texture of the fabric through the design when finished. Pressure is important.