Twinkle™ HTV Rainbow 12in x 20in Sheet
Twinkle™ Heat Transfer Vinyl
Smooth feel once applied.
Twinkle’s silicone like surface holds brilliant colors that appear to practically shine their own light when the glitter winks and waves. The intense sparkle gives twinkle a slight, but significant reflective quality. Twinkle is 225 Microns/ 9mils and is a PU composition.
Layering is NOT recommended with twinkle htv.
Application Instructions (Home Iron): Set iron dial between Cotton and Linen Cover design with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure for 15 seconds If areas of design lift after application, replace cover sheet and re-press for 10 seconds. Peel carrier warm
Application Instructions (Heat Press): Cut in reverse and weed excess material Preheat garment for 2-3 seconds Apply design at 305°F / 150°C Use medium/firm pressure for 15 seconds Peel carrier warm
Laundering: Wait 24 hours before first wash Machine wash cold with mild detergent Do not bleach or dry clean Dry on low setting
For Use On: 100% cotton | Poly/cotton blends | 100% polyester
Setting: Glitter Iron On
Blade: Auto 3
Brother Scan N Cut:
Blade: Auto Blade
Cut Speed: 1
Cut Pressure: 4 *Half cut on
These are suggested starting points for cutting. We suggest doing a test cut, and adjust your settings from there as needed.
Size is +/- .5 inch on width, 3% on Length
Colors of products may be different than what the screen on your device shows. TIP: Always perform a test cut prior to cutting a whole design.